TM-9-2320-279-34-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3

TM-9-2320-279-34-2 - Page 189 of 632

TM 9-2320-279-34-2

(11)

(11)

(12)

Steering System Maintenance Instructions (Cont)

Support backup washer (9).

Install dirt seal (11) in cylinder head (10) lip out, until seal

rests against backup washer (9). Apply grease to dirt seal.

Install salt seal (12) lip out, so it is flush with top of

cylinder head (10). Apply grease to salt seal.

(13) Install seal (13) evenly, garter spring up, until it rests

against backup washer (9). Apply grease to seal.

(14) Install actuating shaft assembly (14) in cylinder

head (10).

NOTE

If installing new nut, drill 3/32-in. (2.4 mm) hole for lock pin.

Use lock pin hole as guide when drilling.

(15) Install bearing retaining nut (15).

(16) Install lock pin (16).

12-27