TM-9-2320-279-34-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3

TM-9-2320-279-34-2 - Page 408 of 632

TM 9-2320-279-34-2

Suspension Maintenance Instructions (Cont)

[ 14-6.2. EQUALIZER BEAM ASSEMBLY (REAR TANDEM) REPAIR (CONT). [

(2) Install end bushing adapter

into clamp, tighten clamp,

and press two beam end

bushings (1) into equalizer

beam (3) so bushings are

centered in beam. Bushings

are seated when clamp

touches equalizer beam.

M984E1 ONLY

(3) Position center bushing (2) in equalizer beam (3) with

open end to INSIDE of beam.

NOTE

•

On M984E1, use clamp and center bushing adapter.

Ž Plugged end of bushing points away from vehicle.

(4) Use center bushing adapter and press beam center

bushing (2) into equalizer beam (3) until center

bushing adapter bottoms on equalizer beam.

TA476668

14-28