TM-9-2320-279-34-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3

  TM-9-2320-279-34-2 - Page 504 of 632

TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-4. SELF-RECOVERY WINCH HYDRAULIC MOTOR REPAIR (CONT).
a. Disassembly.
NOTE
Matchmark four sections of motor housing.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Clamp hydraulic motor (1), shaft end
down, in vise with soft jaws.
Remove four screws (2) and valve
housing (3) from hydraulic motor (1).
Remove two springs (4) and pins (5).
Remove seals (6 and 7).
Remove two check plugs (8), preformed
packings (9), springs (10), and steel
balls (11) from valve housing (3).
Remove plug (12) and preformed
packing (13) from valve housing (3).
Remove balance ring (14).
Remove inner and outer face seals (15
and 16) from balance ring (14).
Remove valve (17).
Remove valve plate (18) from bearing
housing (19).
Remove two seals (20 and 21).
Remove valve drive (22).
16-10


Back to Top