TM-9-2320-279-34-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3

TM-9-2320-279-34-2 - Page 541 of 632

TM 9-2320-279-34-2

Winch Maintenance Instructions (Cont)

(34)

Remove retaining ring (51) from third

planetary carrier assembly (50).

b. Cleaning/Inspection.

Adhesives. solvents.

WARNING

and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin-and clothing To avoid injury or death, keep away

from open fire and use in well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

(1) Clean all metal parts in dry cleaning solvent.

(2) Inspect all parts for damage.

(3) Bushing must be replaced if inside diameter is 1.04 in. (26.42 mm) or greater.

(4) Maximum clearance between bushing and shifter shaft is 0.007 in. (0.178 mm).

(5) Minimum thickness of shifter wear surface is 0.25 in. (6.35 mm).

(6) Replace damaged parts.

c. Assembly.

(1) Install retaining ring (1) in output end of third

planetary carrier assembly (2).

16-31