TM-9-2320-279-34-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 2 OF 3

TM-9-2320-279-34-2 - Page 613 of 632

TM 9-2320-279-34-2

Winch Maintenance Instructions (Cont)

16-17. HEAVY-DUTY WINCH BRAKE REMOVAL/REPAIR/INSTALLATION (CONT).

e. Installation.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

(1)

Apply adhesive-sealant to mating surface of adapter (1).

(2)

Install brake assembly (2) with 12 lockwashers (3) and screws (4) to ring gear (5). Tighten screws

to 30 lb-ft (40.7 N.m).

(3)

Apply pipe thread sealing compound and install plug (6).

(4)

Install preformed packing (7), elbow (8), preformed packing (9), and elbow (10).

(5)

Connect two hydraulic lines (11).

f. Follow-on Maintenance.

(1)

Fill heavy-duty winch (LO 9-2320-279-12).

(2)

Lower heavy-duty winch cover (TM 9-2320-279-10).

(3)

Check operation of heavy-duty winch (TM 9-2320-279-10).

END OF TASK

16-68