TM-9-2320-279-34-3
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 3 OF 3
TM-9-2320-279-34-3 - Page 192 of 717
TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-20. HOIST ASSEMBLY AND PIVOT BUSHINGS REMOVAL/INSTALLATION (CONT).
(5)
Remove two bushings (14).
b. Cleaning/lnspection.
WARNING
(1)
(2)
(3)
(4)
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Clean all metal parts in dry cleaning solvent.
Inspect each part for damage.
Replace damaged parts.
Check bushings for wear. Bushing inside diameter must not exceed 1.010 in. (25.65 mm).
c. Installation.
(1)
Install two bushings (1).
17-92
Back to Top
