TM-9-2320-279-34-3

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 3 OF 3

TM-9-2320-279-34-3 - Page 197 of 717

TM 9-2320-279-34-3

M977, M985, and M984E1 Crane Maintenance Instructions (Cont)

c. Assembly

NOTE

Perform steps

(1)

through

(9)

only if cable

follower assembly was disassembled.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

Install three bearings (1) in

rollers (2), (3), and (4).

Position roller (4) and two thrust

washers (5) on roller shaft (6).

Install bushing (7) in support

plate (8).

Install bushing (7), thrust

washer (9), roller (3), thrust

washer (10), end cap (11), and

screw (12) on roller shaft (6).

Tighten screw to 72 lb-in. (8 N•m)

Install spring pin (13) in bushing

(7) and roller shaft (6).

Install bushing (14) in support

plate (15).

Install bushing (14), thrust

washer (16), roller (2), thrust

washer (17), end cap (18) and

screw (19) on roller shaft (6).

Tighten screw to 72 lb-in. (8 N•m).

Change 3

17-92.5