TM-9-2320-279-34-3

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 3 OF 3

TM-9-2320-279-34-3 - Page 354 of 717

TM 9-2320-279-34-3

M977, M985, and M984E1 Crane Maintenance Instructions (Cont)

NOTE

Some models have guide tubes. For outriggers

without guide tubes, do step

(15).

For outriggers with

guide tubes, do steps

(16)

and

(17).

(15)

Install bracket (29) with two washers (30),

lockwashers (31), and nuts (32).

(16)

Install bracket (33) with two washers (34),

lockwashers (35), and nuts (36).

(17)

Install right guide tube (37) and left guide

tube (38) using screw (39), two washers (40),

and locknut (41). Tighten nut until there is a

0.03-in. (0.75 mm) gap between washer and

guide tube.

c.

Follow-on Maintenance.

(1)

Outrigger cover installed (TM 9-2320-279-20).

(2)

Outrigger leg cylinder installed (para 17-35).

END OF TASK

Change 3

17-170.4.1/(17-170.4.2 blank)