TM 9-2320-279-34-3
Power Takeoff (PTO) and Hydraulic Pump Maintenance Instructions (Cont)
19-4.
HYDRAULIC PUMP REPAIR (M984E1) (CONT).
NOTE
Wear plate of Model B pump has a different
configuration.
(13)
Remove front wear plate (24).
(14)
Remove drive gear (25) and driven
gear (26).
(15)
Remove center section (27) from inlet
port section (1).
(16)
Remove rear wear plate (28), seal
retainer (29), and seal gland (30).
NOTE
Model B has an additional preformed packing.
Do step
(16.1)
for Model B.
(16.1)
Remove preformed packing (30.1) from
center section (31).
(17)
Remove center section (31).
(18)
Remove preformed packing (32).
NOTE
Model A has two studs installed in inlet port
section. Do step
(20)
for Model A.
(19)
Remove coupling (33).
(20)
Remove two studs (34) from inlet port
section (1).
(21)
Remove eight studs (36) from inlet port
section (1).
19-20
Change 3