TM-9-2320-279-34-3
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 3 OF 3
TM-9-2320-279-34-3 - Page 77 of 717
TM 9-2320-279-34-3
M977, M985,
and M984E1 Crane Maintenance Instructions (Cont)
17-7.
SWING DRIVE MOTOR REMOVAL/REPAIR/INSTALLATION (CONT).
d. Assembly.
(1)
Install shaft seal (1) and dust seal (2) in flange cover (3).
(2)
Install preformed packing (4), flange cover (3), six lockwashers (5), and screws (6) in motor (7).
(3)
Install bearing (8) and thrust washer (9) on shaft (10).
(4)
Aline and install shaft (10) alining any open slot in shaft with timing hole in motor (7).
17-32
Back to Top
