TM-9-2320-279-34-3
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 3 OF 3
TM-9-2320-279-34-3 - Page 80 of 717
TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-7.1 SWING DRIVE MOTOR REMOVAL/REPAIR/INSTALLATION (M984E1).
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
M984E1
Test Equipment
None
Special Tools
None
Supplies
Compound, sealing and thread locking,
Item 26, Appendix C
Adhesive-sealant, silicone, Item 6, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
Para 17-2.1
Swing drive motor hydraulic
hoses and tubes removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a.
Removal.
(1)
Remove two screws (1) and lockwashers (2)
(2)
Remove motor (3) from brake (4).
Change 3
17-34.1
Back to Top
