TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 322 of 951

4-51. BLACKOUT DRIVE LIGHT LAMP REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Three gaskets (Appendix G, Item 46)

Gasket (Appendix G, Item 56)

Adhesive sealant (Appendix C, Item 10)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Battery ground cable disconnected

(para. 4-73).

1.

Loosen three retaining screws (2) from light door (6).

2.

Remove light door (6), three gaskets (5.1), and gasket (3) from light body (5). Discard gasket (3) and

gaskets (5.1).

3.

Remove lamp (4).

4.

Clean mating surface on light door (6) and light body (5). Remove sealant.

1.

Install lamp (4).

2.

Install three gaskets (5.1), gasket (3), and light door (6) to light body (5) with lens hood (1) at top.

NOTE

To prevent moisture from entering light assembly, tighten all

screws evenly.

3.

Secure light door (6) by tightening three screws (2).

4.

Apply thin coat of sealant to seam between light body (5) and light door (6).

b. Installation

a. Removal

TM 9-2320-280-20-2

4-84

Change 3