TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 330 of 951

4-56. REAR COMPOSITE LIGHT ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two capscrews (3), washers (4), ground 95B (5), and ground strap (6) from

housing (17).

2.

Remove two capscrews (15), lockwashers (16), and pull shield (1) away from “D” beam (14).

Discard lockwashers (16).

3.

Remove screw (2), nut (12) and clamp (11) from shield (1).

4.

Disconnect leads 21 (7), 23 (8), 24 (9), and 22-461 (10) from body harness (13).

5.

Remove composite light (18) from housing (17).

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two lockwashers (Appendix G, Item 135)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Battery ground cable disconnect (para. 4-73).

b. Installation

1.

Install composite light (18) on housing (17).

2.

Connect leads 21 (7), 23 (8), 24 (9), and 22-461 (10) to body harness (13).

3.

Install clamp (11) on shield (1) with screw (2) and nut (12).

4.

Install shield (1) on “D” beam (14) with two capscrews (15) and lockwashers (16).

5.

Install ground strap (6) and ground 95B (5) on housing (17) with two washers (4) and capscrews (3).

TM 9-2320-280-20-2

4-92

Change 3

NOTE

Prior to removal, tag leads for installation.