TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 334 of 951

4-59. MAIN LIGHT SWITCH REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Lockwasher (Appendix G, Item 136)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Battery ground cable disconnect (para. 4-73).

1.

Remove cannon plug (1) from main light switch (8).

2.

Remove screw (6), lockwasher (5), top single position lever (4), and washer (7) from switch (8).

Discard lockwasher (5).

NOTE

Lower right lever must be raised to remove screw.

3.

Remove four screws (3) from switch (8) and instrument panel (2).

4.

Remove switch (8) from behind instrument panel (2).

1.

With single position lever shaft (9) at top of switch (8), install switch (8) into hole in instrument

panel (2) with four screws (3).

2.

Install washer (7) and top single position lever (4) to switch (8) with lockwasher (5) and screw (6).

3.

Install cannon plug (1) to rear of switch (8).

b. Installation

a. Removal

TM 9-2320-280-20-2

4-96

Change 3