TM-9-2320-280-20-2
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3
JANUARY 1996
TM-9-2320-280-20-2 - Page 348 of 951
TM 9-2320-280-20-2
4-110
Change 3
4-69. BACKUP LIGHT ASSEMBLY REPLACEMENT
a. Removal
NOTE
• Perform steps 1 and 2 for M1035 and M1035A1 vehicles.
• Perform steps 3 through 5 for M1035A2 vehicle.
1.
Disconnect lead 467F (1) from lamp assembly (3).
2.
Remove two nuts (6), lockwashers (5), lead 95H (4), and lamp assembly (3) from bracket (2).
Discard lockwashers (5).
3.
Remove tiedown strap (11) and disconnect leads 467F (1) and 95H (4) from body harness leads (10).
Discard tiedown strap (11).
4.
Remove capscrew (8) and clamp (9) from body (12).
5.
Remove two nuts (6), lockwashers (5), lead 95H (4), and lamp assembly (3) from bracket (7).
Discard lockwashers (5).
INITIAL SETUP:
Applicable Models
M1035, M1035A1, M1035A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials Parts
Two lockwashers (Appendix G, Item 139)
Tiedown strap (Appendix G, Item 310)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Battery ground cable disconnected (para. 4-73).
NOTE
• Perform steps 1 through 3 for M1035A2 vehicle.
• Perform steps 4 and 5 for M1035 and M1035A1 vehicles.
1.
Install lamp assembly (3) and lead 95H (4) on bracket (7) with two lockwashers (5) and nuts (6).
2.
Connect leads 467F (1) and 95H (4) to body harness leads (10) and install tiedown strap (11).
3.
Install clamp (9) on body (12) with capscrew (8).
4.
Install lamp assembly (3) and lead 95H (4) on bracket (2) with two lockwashers (5) and nuts (6).
5.
Connect lead 467F (1) to lamp assembly (3).
b. Installation
This task covers:
a. Removal
b. Installation
Back to Top
