TM-9-2320-280-20-2
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3
JANUARY 1996
TM-9-2320-280-20-2 - Page 38 of 951
TM 9-2320-280-20-2
3-10. CDR VALVE HOSES REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Hood raised and secured (TM 9-2320-280-10).
automotive (Appendix B, Item 1)
Engine access cover removed (para. 10-15).
CDR valve and bracket removed (para. 3-9).
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
1. Loosen clamp (2) and disconnect CDR valve intake manifold hose (1) from intake manifold (7).
2. Inspect adapter (3) for breaks or cracks. Replace if defective.
3. Loosen clamp (5) and disconnect CDR valve oil fill tube hose (4) from oil fill tube (6).
1. Connect CDR valve oil fill tube hose (4) to oil fill tube (6) and tighten clamp (5).
2. Connect to CDR valve intake manifold hose (1) to intake manifold (7) and tighten clamp (2).
FOLLOW-ON TASKS:
3-18
Install CDR valve and bracket (para. 3-9).
Lower and secure hood (TM 9-2320-280-10).
Install engine access cover (para. 10-15).
Back to Top
