TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 623 of 951

TM 9-2320-280-20-2

5-25. TRANSFER CASE VENT LINE REPLACEMENT

NOTE

• Perform steps 1 through 5 for old configuration.

• Perform steps 6 through 20 for new configuration.

1.

Disconnect vent line (2) from elbow (1).

2.

Remove elbow (1) from transfer case (3).

3.

Remove two capscrews (5), clamps (4), and vent line (2) from bracket (8) and transmission governor

cover (6).

4.

Disconnect three vent lines (2) from tee (7).

5.

Remove clamps (4) from vent line (2).

6.

Disconnect vent line (11) from elbow (10).

7.

Remove elbow (10) and pipe nipple (9) from transfer case (3).

8.

Remove two capscrews (5), clamps (4), and vent line (11) from bracket (8) and transmission

governor cover (6).

9.

Deleted.

10.

Disconnect vent lines (11) and (13) from elbow (16).

11.

Remove clamps (4) from vent line (11).

12.

Disconnect vent line (13) from elbow (14).

a. Removal

INITIAL SETUP:

5-52

Change 3

This task covers:

a.

Removal

b.

Installation

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-280-24P