TM-9-2320-280-20-2
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3
JANUARY 1996
TM-9-2320-280-20-2 - Page 897 of 951
9-3. FRONT BUMPER AND TOWING BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1026, M1026A1, M1036, M1038, M1038A1,
M1042, M1044, M1044A1, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Five locknuts (Appendix G, Item 81)
Manual References
TM 9-2320-280-24P
Equipment Condition
Winch removed (para. 10-107).
1.
Remove three locknuts (3), washers (4), capscrews (5), washers (4), and two towing brackets (6)
from front bumper (1) and two frame extensions (2). Discard locknuts (3).
2.
Remove two locknuts (3), washers (4), capscrews (5), and washers (4) from front bumper (1) and
frame extensions (2). Discard locknuts (3).
3.
Remove two capscrews (7), washers (8), and front bumper (1) from frame extensions (2).
1.
Install front bumper (1) on two frame extensions (2) with two washers (8) and capscrews (7).
Tighten capscrews (7) to 90 lb-ft (122 N
•
m).
2.
Install front bumper (1) on two frame extensions (2) with two washers (4), capscrews (5),
washers (4), and locknuts (3). Tighten locknuts (3) to 90 lb-ft (122 N
•
m).
3.
Install two towing brackets (6) on front bumper (1) with three washers (4), capscrews (5),
washers (4), and locknuts (3). Tighten locknuts (3) to 90 lb-ft (122 N
•
m).
b. Installation
a. Removal
TM 9-2320-280-20-2
Change 3
9-3
FOLLOW-ON TASK: Install winch (para. 10-107).
1
2
3
4
4
5
6
7
8
Back to Top
