TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 888 of 951

8-27. POWER STEERING COOLER HOSE REPLACEMENT

1.

Loosen two clamps (14) and disconnect hoses (7) and (10) from cooler (13).

2.

Remove tiedown strap (11) from oil cooler lines (12) and hoses (7) and (10). Discard tiedown

strap (11).

3.

Loosen clamp (9) and remove hose (10) from steering gear (8).

4.

Remove two locknuts (6), washers (5), and capscrews (1) from four clamps on hoses (7) and (15).

Discard locknuts (6).

5.

Loosen clamp (2) and remove hose (7) from control valve elbow (3) and remove hose (7).

This task covers:

a. Removal

b. Installation

a. Removal

WARNING

Do not drain fluid when engine is hot. Severe injury to personnel

will result.

CAUTION

Cover or plug all hoses and connections immediately after

disconnection to prevent contamination. Remove all plugs prior to

connection.

NOTE

Have drainage container ready to catch fluid.

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 70)

Tiedown strap (Appendix G, Item 308)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Hood raised and secured (TM 9-2320-280-10).

General Safety Instructions

Do not drain fluid when engine is hot.

TM 9-2320-280-20-2

8-82

Change 3