TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 883 of 951

TM 9-2320-280-20-2

8 - 2 5 .

POWER STEERING HYDRAULIC SYSTEM PRESURE AND RETURN HOSE

REPLACEMENT (Cont'd)

FOLLOW-ON TASKS: • Connect battery ground cable (para. 4-73).

• Bleed power steering system (para. 8-29).

Change 2

8 - 7 7

3.

Position two clamps (15) and clamp (5) on return hose (8) and install control valve hose (16) and two

clamps (15) with two capscrews (14), washers (13), and locknuts (12).

NOT E

Perform step 5 for vehicles with new alternator support bracket

configuration.

4.

Install clamp (10), spacer (4), and two clamps (5) to alternator bracket (1) with capscrew (2),

washer (7), and locknut (6).

5.

Install harness clamp (10) and two clamps (5) to power steering lines bracket (11) with capscrew (2),

two washers (7), and locknut (6). Install tiedown strap (11.1) on return hose (8).