TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 134 of 1168

1 0 - 6 8 .

M11 DECONTA M

I N ATION BRACKETS INSTA L L AT

I O N

This task covers:

Installation

Installation

INITIAL SETUP:

Applicable Models

M966, M966A1, M998, M998A1, M1025,

M1025A1, M1025A2, M1026, M1026A1,

M1036, M1037, M1038, M1038A1, M1042,

M1121

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

TM 9-2320-280-20-3

1 0 - 1 1 2

Change 1

NOT E

Perform steps 1 and 2 for models M966, M966A1, and M1036 vehicles only.

1.

Using bracket (2) as a template, locate, mark, and drill four 0.281-inch (7.14 mm) diameter holes (1)

in right wheel housing (4).

2.

Install bracket (2) on right wheel housing (4) with four washers (3), screws (5), washers (3), and

nuts (6).

NOT E

Perform steps 3 and 4 for models M998, M998A1, M1038, and M1038A1

vehicles only.

3.

Using bracket (9) as a template, locate, mark, and drill four 0.281-inch (7.14 mm) diameter

holes (10) in left wheel housing (11).

4.

Install bracket (9) on left wheel housing (11) with four washers (7), screws (8), washers (7), and

nuts (12).

NOT E

The following procedure is for initial installation of apparatus (P/N D5-

51-269). This apparatus is not included in TM 9-2320-280-24P.