TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 133 of 1168

10-67.

“

B

”

PILLAR REPLACEMENT

This task covers:

a. Removal

b.

Installation

a. Removal

Remove twelve locknuts (5), washers (4), capscrews (2), and “B” pillar (1) from body (3). Discard

locknuts (5).

INITIAL SETUP:

Applicable Models

M998, M998A1, M1035, M1035A1, M1035A2,

M1037, M1038, M1038A1, M1042

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Twelve locknuts (Appendix G, Item 86)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

• Soft top removed, if installed (TM 9-2320-280-10).

• Soft top door strikers removed, if installed

(para. 10-103).

• Three point seatbelt removed (para. 10-48 or

10-48.1).

b. Installation

FOLLOW-ON TASKS: • Install soft top, if removed (TM 9-2320-280-10).

• Install soft top door strikers, if removed (para. 10-103).

• Install three point seatbelt (para. 10-48 or 10-48.1).

TM 9-2320-280-20-3

Change 2

10-111

Install “B” pillar (1) on body (3) with twelve capscrews (2), washers (4), and locknuts (5). Tighten

locknuts (5) to 15 lb-ft (20 N

•

m).