TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 145 of 1168

TM 9-2320-280-20-3

10-73. WINDSHIELD WIPER LINKAGE REPLACEMENT

This task covers:

a Removal

b. Installation

lNITIAL SETUP:

Tools

Equipment Condition

General mechanic’s tool kit:

●

Windshield wiper switch/motor (12342501)

automotive (Appendix B, Item 1)

removed (para. 10-72).

Manual References

TM 9-2320-280-24P

●

Windshield wiper motor (SF5578716) removed

(para. 10-71).

1. Remove two access covers (7) nom windshield frame (1).

2. Pull connector arm retainer (3) from ball stud (5) and remove motor drive lever (6) from connector

arms (4).

3. Disconnect connector arms (4) from wiper arm pivots (2) and remove connector arms (4) through

center access in windshield frame (1).

CAUTlON

Install the left (driver’s) side connector arm first or damage to

equipment will result.

1. Install connector arms (4) through center access on windshield frame (1) and connect connector

arms (4) to wiper arm pivots (2).

2. Connect connector arms (4) together with motor drive lever (6) and connector arm retainer (3) on

ball stud (5).

3. Install access covers (7) on windshield frame (1).

/

FOLLOW-ON TASK:

●

Install windshield wiper switch/motor (12342501) (para. 10-72).

●

Install windshield wiper motor (SF5578716) (para. 10-71).

10-122