TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 257 of 1168

TM 9-2320-280-20-3

11-8

Change 2

11-3. BALLISTIC CREW DOOR HINGE REPLACEMENT

This task covers:

a. Removal

b. Installation

Materials/Parts

Three locknuts (Appendix G, Item 87)

Manual References

TM 9-2320-280-24P

Equipment Condition

Ballistic crew door removed (para. 11-2).

a. Removal

Remove three locknuts (5), washers (2), screws (1), washers (2), hinge (3), and shim(s) (4) from crew

door (6). Discard locknuts (5).

b. Installation

Install shim(s) (4) and hinge (3) on crew door (6) with three washers (2), capscrews (1), washers (2), and

locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N

•

m).

NOTE

• M966, M966A1, M996, M996A1, M997, M997A1, M997A2,

M1025, M1025A1, M1025A2, M1026, M1026A1, and M1036

vehicles have one additional hinge shim on the inner door side

of each door hinge mounting hardware.

• On top hinges, note position of doorstop bracket.

FOLLOW-ON TASK: Install ballistic crew door (para. 11-2).

INITIAL SETUP:

Applicable Models

All models except M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038,

M1038A1, M1042, M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)