TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 265 of 1168

11-9. BALLISTIC CREW DOOR WINDOW STOP REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two locknuts (2), screws (5), washers (4), and window stop bracket (6) from side rail (3).

Discard locknuts (2).

2.

Remove locknut (7), washer (8), screw (1), and pad (9) from window stop bracket (6). Discard

locknut (7).

CAUTION

If both window stops are being replaced, ensure ballistic window is

locked in the full up position to prevent damage to window.

INITIAL SETUP

Applicable Models

All models except M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038, M1038A1,

M1042, M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 87)

Locknut (Appendix G, Item 88)

Manual References

TM 9-2320-280-24P

b. Installation

1.

Install pad (9) on window stop bracket (6) with screw (1), washer (8), and locknut (7).

2.

Install window stop bracket (6) on side rail (3) with two washers (4), screws (5), and locknuts (2).

TM 9-2320-280-20-3

11-16

Change 2