TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 353 of 1168

11-72. TRAVERSING UNIT MOUNT ADAPTER MAINTENANCE

This task covers:

a. Disassembly

b. Assembly

a. Disassembly

Remove six locknuts (3), washers (4), capscrews (5), three retainers (6), and coupling clamp (1) from

traversing unit mount adapter (2). Discard locknuts (3).

INITIAL SETUP:

Applicable Models

M966, M966A1, M1036, M1045, M1045A1,

M1045A2, M1046, M1046A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Six locknuts (Appendix G, Item 70)

Manual References

TM 9-1425-450-12

TM 9-1425-472-12

TM 9-2320-280-24P

Equipment Condition

Traversing unit mount adapter removed

(TM 9-1425-450-12, TM 9-1425-472-12).

b. Assembly

Install coupling clamp (1) on traversing unit mount adapter (2) with three retainers (6), capscrews (5),

washers (4), and locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 N

•

m).

NOTE

• Upper coupling clamp and lower coupling clamp are removed

and installed the same. This procedure covers the upper

coupling clamp.

• Note position of coupling clamp for installation.

FOLLOW-ON TASK: Install traversing unit mount adapter (TM 9-1425-450-12, TM 9-1425-472-12).

TM 9-2320-280-20-3

Change 2

11-103