TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996
TM-9-2320-280-20-3

  TM-9-2320-280-20-3 - Page 367 of 1168

11-76. WATER CAN BUMPER REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove two locknuts (2), washers (3), capscrews (6), washers (3), water can bumper (5), and water can
bumper bracket (4) from MGS battery rack assembly (1). Discard locknuts (2).
INITIAL SETUP:
Applicable Models
M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 70)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
b. Installation
Install water can bumper bracket (4) and water can bumper (5) on MGS battery rack assembly (1) with
two washers (3), capscrews (6), washers (3), and locknuts (2). Tighten locknuts (2) to 6 lb-ft (8 N
•
m).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
TM 9-2320-280-20-3
Change 2
11-117


Back to Top