TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 368 of 1168

11-77. MISSILE GUIDANCE SET (MGS) BATTERY RACK ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two locknuts (11), washers (2), capscrews (3), and washers (2) from MGS battery

rack (4) and missile rack (1). Discard locknuts (11).

2.

Remove four locknuts (9), washers (5), reinforcement brackets (8) and (10), capscrews (6),

washers (5), and MGS battery rack (4) from wheelhouse (7). Discard locknuts (9).

3.

Remove footman loop and strap (para. 10-9) from MGS battery rack (4).

INITIAL SETUP:

Applicable Models

M966, M966A1, M1036, M1045, M1045A1,

M1045A2, M1046, M1046A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Six locknuts (Appendix G, Item 70)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

• Rear end of cargo shell door raised

(TM 9-2320-280-10).

• Water can bumper removed (para. 11-76).

b. Installation

1.

Install footman loop and strap (para. 10-9) on MGS battery rack (4).

2.

Install MGS battery rack (4) on wheelhouse (7) with four washers (5), capscrews (6), reinforcement

brackets (8) and (10), washers (5), and locknuts (9).

3.

Install MGS battery rack (4) on missile rack (1) with two washers (2), capscrews (3), washers (2),

and locknuts (11). Tighten capscrews (3) and locknuts (9) to 6 lb-ft (8 N

•

m).

TM 9-2320-280-20-3

11-118

Change 2