TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 400 of 1168

11-107. TRIPLE AMMO BOX TRAY (40 MM) REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove three locknuts (8), washers (2), capscrews (3), and washers (2) from ammo box tray (1) and

cargo floor (9). Discard locknuts (8).

2.

Remove three locknuts (7), washers (4), reinforcement brackets (6), capscrews (5), washers (4), and

ammo box tray (1) from cargo floor (9). Discard locknuts (7).

INITIAL SETUP:

Applicable Models

M1025, M1025A1, M1025A2, M1026,

M1026A1, M1043, M1043A1, M1043A2,

M1044, M1044A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Six locknuts (Appendix G, Item 70)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Rear end of cargo shell door raised

(TM 9-2320-280-10).

b. Installation

1.

Install ammo box tray (1) on cargo floor (9) with three washers (4), capscrews (5), reinforcement

brackets (6), washers (4), and locknuts (7).

2.

Secure ammo box tray (1) to cargo floor (9) with three washers (2), capscrews (3), washers (2), and

locknuts (8). Tighten capscrews (3) and (5) to 6 lb-ft (8 N

•

m).

FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).

TM 9-2320-280-20-3

Change 2

11-149