TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 391 of 1168

11-98. GUN MOUNT SUPPORT (CALIBER .50) REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two locknuts (1), washers (2), capscrews (7), washers (2), and pad (3) from bracket (6).

Discard locknuts (1).

2.

Remove four capscrews (5), washers (4), and bracket (6) from mounting plate (8).

INITIAL SETUP:

Applicable Models

M1025, M1025A1, M1025A2, M1026,

M1026A1, M1043, M1043A1, M1043A2,

M1044, M1044A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 70)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Rear end of cargo shell door raised

(TM 9-2320-280-10).

b. Installation

1.

Install bracket (6) on mounting plate (8) with four washers (4) and capscrews (5). Tighten

capscrews (5) to 26 lb-ft (35 N

•

m).

2.

Install pad (3) on bracket (6) with two washers (2), capscrews (7), washers (2), and locknuts (1).

Tighten locknuts (1) to 6 lb-ft (8 N

•

m).

FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).

TM 9-2320-280-20-3

11-140

Change 2