TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 383 of 1168

11-91. RIFLE MOUNTING CLAMP REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

Remove two locknuts (2), washers (3), screws (4), washers (3), and clamp (5) from clamp bracket (1).

Discard locknuts (2).

INITIAL SETUP:

Applicable Models

All models except M996, M996A1, M997,

M997A1, M997A2, M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038,

M1038A1, M1042, M1097, M1097A1,

M1097A2, M1123

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 91)

Two locknuts (new configuration)

(Appendix G, Item 92)

Manual References

TM 9-2320-280-24P

b. Installation

Install clamp (5) on clamp bracket (1), with moveable finger (6) inboard, with two washers (3),

screws (4), washers (3), and locknuts (2).

NOTE

• Procedures for replacing the left and right rifle mounting

clamps are basically the same. This procedure covers the right

rifle mounting clamp.

• Vehicle may be equipped with new rifle mounting clamp bracket

configuration for M16 rifle or M203 grenade launcher.

TM 9-2320-280-20-3

Change 2

11-133