TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 379 of 1168
11-87. LAUNCH TUBE STOWAGE BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove two cotter pins (5), pins (8), and strap (6) from front launch tube bracket (7) Discard cotter
pins (5).
2.
Remove four locknuts (4), washers (3), front launch tube bracket (7), and plate (2) from cargo
door (1). Discard locknuts (4).
3.
Remove four capscrews (9), lockwashers (10), and rear launch tube bracket (11) from cargo
door (1). Discard lockwashers (10).
INITIAL SETUP:
Applicable Models
M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Sealing compound (Appendix C, Item 45)
Four lockwashers (Appendix G, Item 134)
Two cotter pins (Appendix G, Item 23)
Four locknuts (Appendix G, Item 79)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
b. Installation
1.
Apply sealing compound to threads of four capscrews (9). Install rear launch tube bracket (11) on
cargo door (1) with four lockwashers (10) and capscrews (9). Tighten capscrews (9) to10 lb-ft
(14 N
•
m).
2.
Install plate (2) and front launch tube bracket (7) on cargo door (1) with four washers (3) and
locknuts (4). Tighten locknuts (4) to 10 lb-ft (14 N
•
m).
3.
Install strap (6) on front launch tube bracket (7) with two pins (8) and cotter pins (5).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
TM 9-2320-280-20-3
Change 2
11-129
Back to Top
