TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 435 of 1168
11-124. SOFT TOP AMBULANCE LITTER ASSEMBLY MAINTENANCE
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Inspection
NOTE
For instructions on replacement of rivets, refer to para. 10-66.
1.
Remove two capscrews (22) and washers (21) from litter assembly (1), spacers (20), and cargo
floor (26).
2.
Remove two locknuts (11), washers (12), capscrews (24), and washers (12) from litter
assembly (1), spacers (25), and cargo floor (26). Discard locknuts (11).
3.
Remove four locknuts (13), washers (14), capscrews (19), washers (14), and shims (17) from litter
assembly (1) and wheelhouses (10). Discard locknuts (13).
4.
Remove four locknuts (15), washers (16), capscrews (23), washers (16), and shims (18) from litter
assembly (1) and wheelhouses (10). Discard locknuts (15).
5.
Remove two nuts (9), washers (5), capscrews (4), and washers (5) from spacers (6), litter
assembly (1), and cargo floor (26).
6.
Remove two locknuts (8), washers (3), capscrews (2), and washers (3) from spacers (7), litter
assembly (1), and cargo floor (26). Discard locknuts (8).
7.
Remove litter assembly (1) from vehicle.
NOTE
Note position of spacers for installation.
8.
Remove spacers (6), (7), (20), and (25) from cargo floor (26).
a. Removal
INITIAL SETUP:
Applicable Models
M1035, M1035A1, M1035A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Special Tools
Torque adapter (Appendix B, Item 145)
Materials/Parts
Eleven locknuts (Appendix G, Item 70)
Twenty-two locknuts (Appendix G, Item 128)
Six lockwashers (Appendix G, Item 133)
Eight locknuts (Appendix G, Item 112)
Eight blind rivets (Appendix G, Item 245)
Two lockwashers (Appendix G, Item 135)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Tailgate lowered (TM 9-2320-280-10).
TM 9-2320-280-20-3
11-176
Change 2
Back to Top
