TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 478 of 1168

11-147. LITTER HANDLE BUMPER REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two rivets (1) and upper bumper (2) from rear door (3).

2.

Remove two screws (5) and lower bumper (4) from rear door (3).

NOTE

• The procedure for replacing litter handle bumpers are basically

the same for M996, M996A1, M997, M997A1, and M997A2

ambulances. This procedure covers the rear door litter handle

bumpers replacement for M997, M997A1, and M997A2

ambulances.

• For instructions on replacement of rivets, refer to para. 10-66.

INITIAL SETUP:

Applicable Models

M996, M996A1, M997, M997A1, M997A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two blind rivets (Appendix G, Item 258)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Rear door opened (TM 9-2320-280-10).

b. Installation

1.

Install lower bumper (4) on rear door (3) with two screws (5).

2.

Install upper bumper (2) on rear door (3) with two rivets (1).

FOLLOW-ON TASK: Close rear door (TM 9-2320-280-10).

TM 9-2320-280-20-3

Change 2

11-215