TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 484 of 1168

11-152. STOWAGE DOOR REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove seal (4), if damaged, from door (8).

2.

Remove three rivets (3) and door (8) from hinge (2).

3.

Remove three rivets (1) and hinge (2) from bulkhead (6).

4.

Remove two rivets (5) and hasp (7) from bulkhead (6).

5.

Remove four rivets (10) and staple (9) from door (8).

NOTE

• Upper and lower stowage doors are removed and installed

basically the same. This procedure covers the lower stowage

door.

• For instructions on replacement of rivets, refer to para. 10-66.

INITIAL SETUP:

Applicable Models

M997, M997A1, M997A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Five solid rivets (Appendix G, Item 271)

Three blind rivets (Appendix G, Item 260)

Four solid rivets (Appendix G, Item 272)

Manual References

TM 9-2320-280-24P

b. Installation

1.

Install hasp (7) on bulkhead (6) with two rivets (5).

2.

Install staple (9) on door (8) with four rivets (10).

3.

Install hinge (2) on bulkhead (6) with three rivets (1).

4.

Install door (8) on hinge (2) with three rivets (3).

5.

Install seal (4) on door (8), if removed.

TM 9-2320-280-20-3

Change 2

11-221