TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 499 of 1168

11-160. LITTER STOWAGE TRAY SUPPORT AND STRAP REPLACEMENT

This task covers:

a. Leg Removal

c. Straps Removal

b. Leg Installation

d. Straps Installation

INITIAL SETUP:

Applicable Models

M996, M996A1, M997, M997A1, M997A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four blind rivets (Appendix G, Item 257)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Litter stowage door opened (TM 9-2320-280-10).

TM 9-2320-280-20-3

11-236

Change 2

NOTE

Steps a. and b. apply to M997, M997A1, and M997A2 vehicles

only.

1.

Remove spring (5) from litter tray support (3) and litter tray (2).

NOTE

For instruction on replacement of rivets, refer to para. 10-66.

2.

Remove four rivets (1), two brackets (4), and litter tray support (3) from litter tray (2).

1.

Install litter tray support (3) and two brackets (4) on litter tray (2) with four rivets (1).

2.

Install spring (5) on litter tray (2) and support (3).

NOTE

Steps c. and d. apply to M996 and M996A1 vehicles only.

Remove two screws (7), footman loop (9), and straps (8) from body (6).

NOTE

If rivnuts are damaged, refer to para. 10-66 for replacement.

Install straps (8) and footman loop (9) on body (6) with two screws (7).

d. Straps Installation

c. Straps Removal

b. Leg Installation

a. Leg Removal