TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 675 of 1168

12-48.2. ARCTIC HEATER OIL PAN SHROUD REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove cotter pin (8) and flex tube (7) from oil pan shroud (6). Discard cotter pin (8).

2.

Remove two locknuts (5), washers (4), starter cable bracket (3), and washer (2) from oil pan (1). Discard

locknuts (5).

3.

Remove seven locknuts (9), washers (10), and oil pan shroud (6) from oil pan (1). Discard locknuts (9).

INITIAL SETUP:

Applicable Models

_______________

M966, M966A1, M997, M997A1, M997A2,

M998, M998A1, M1025, M1025A1, M1025A2,

M1037, M1038, M1038A1, M1121

Tools

____

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

_____________

Cotter pin (Appendix G, Item 13)

Nine locknuts (Appendix G, Item 129)

Manual References

________________

TM 9-2320-280-20

TM 9-2320-280-24P

General Safety Instructions

______________________

Do not touch hot exhaust system with bare hands.

b. Installation

1.

Install oil pan shroud (6) on oil pan (1) with seven washers (10) and locknuts (9).

2.

Install washer (2) and starter cable bracket (3) on oil pan (1) with two washers (4) and locknuts (5).

3.

Connect flex tube (7) to oil pan shroud (6) with cotter pin (8).

TM 9-2320-280-20-3

12-70.4

Change 2

WARNING

Do not touch hot exhaust system components with bare hands.

Severe injury may result.