TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 713 of 1168

12-74. ARCTIC CURTAIN ANGLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Peel curtain (2) back from fastener tape (1) on angle assembly (4).

2.

Remove three locknuts (8), washers (9), capscrews (5), washers (6), and angle assembly (4) from

cargo floor (7). Discard locknuts (8).

3.

Peel fastener tape (1) from angle assembly (4).

4.

Clean remaining adhesive from angle assembly (4) surface.

INITIAL SETUP:

Applicable Models

M998, M998A1, M1037, M1038, M1038A1,

M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Adhesive-sealant (Appendix C, Item 10)

Three locknuts (Appendix G, Item 94)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-280-24P

b. Installation

TM 9-2320-280-20-3

Change 2

12-107

NOTE

Ensure surface is free of dirt and oil before applying adhesive

backing.

1.

Peel paper backing (3) from fastener tape (1) and install fastener tape (1) to angle assembly (4).

2.

Install angle assembly (4) on cargo floor (7) with three washers (6), capscrews (5), washers (9), and

locknuts (8). Tighten locknuts (8) to 17 lb-ft (23 N

•

m).

3.

Attach curtain (2) to fastener tape (1) on angle assembly (4).