TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 709 of 1168
12-70. SWINGFIRE WINDSHIELD WASHER PUMP HARNESS EXTENSION REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M966, M966A1, M996, M996A1, M997,
M997A1, M997A2, M998, M998A1, M1025,
M1025A1, M1025A2, M1037, M1038, M1038A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Tiedown strap (Appendix G, Item 312)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
• Battery ground cable disconnected (para. 4-73).
• Hood raised and secured (TM 9-2320-280-10).
1.
Guide harness extension (7) through cowl (5).
2.
Connect leads 71C (3) and 57D (6) to body wiring harness (4) under dash panel.
3.
Connect leads 57D (6) and 71C (3) to windshield washer pump leads 71C (2) and 57D (1).
4.
Install harness extension (7) on protective control box wiring harness (9) with tiedown strap (8).
TM 9-2320-280-20-3
Change 2
12-103
NOTE
Prior to removal, tag leads for installation.
1.
Remove tiedown strap (8) from harness extension (7) and protective control box wiring
harness (9). Discard tiedown strap (8).
2.
Disconnect leads 71C (3) and 57D (6) from windshield washer pump leads 71C (2) and 57D (1).
3.
Disconnect leads 71C (3) and 57D (6) from body wiring harness (4) under dash panel.
4.
Pull harness extension (7) out through cowl (5) and remove harness extension (7) from vehicle.
FOLLOW-ON TASKS: • Lower and secure hood (TM 9-2320-280-10).
• Connect battery ground cable (para. 4-73).
b. Installation
a. Removal
1
2
3
4
~
5
6
7
8
9
6
Back to Top
