TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 885 of 1168

12-272

Change 2

TM 9-2320-280-20-3

12-179. SIGHT BOX STRAPS REPLACEMENT (L119)

This task covers:

a. Removal

b.

Installation

a. Removal

1.

Remove strap hooks (5) from strap buckles (6).

2.

Remove four locknuts (4), screws (1), two footman loops (3), and straps (7) and (16) from ammo

rack (2). Discard locknuts (4).

3.

Remove two locknuts (10), screws (8), footman loop (9), and strap (7) from “C” beam (11). Discard

locknuts (10).

4.

Remove two screws (15), washers (14), flat footman loop (13), and strap (16) from cargo floor (12).

Remove strap (16).

NOTE

The sight box #1 straps and the sight box #2 strap are replaced

basically the same. This procedure covers the sight box #1 straps.

INITIAL SETUP:

Applicable Models

_______________

M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

_____________

Six locknuts (Appendix G, Item 97)

Manual References

TM 9-2320-280-24P

b. Installation

1.

Slide strap (16) onto flat footman loop (13). Install flat footman loop (13) and strap (16) on cargo

floor (12) with two screws (15) and washers (14).

2.

Slide strap (7) onto footman loop (9). Install footman loop (9) and strap (7) on “C” beam (11) with

two screws (8) and locknuts (10).

3.

Slide straps (7) and (16) onto two footman loops (3). Install footman loops (3) and straps (7) and (16)

on ammo rack (2) with four screws (1) and locknuts (4).

4.

Attach strap hooks (5) on strap buckles (6).