TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 901 of 1168

g.

Passenger's Side Siren Switch and Driver's Side Siren Switch Installation

TM 9-2320-280-20-3

12-185. SIREN AND WARNING LIGHT INSTALLATION (Cont’d)

1. Install two shells (3), washers (4), and terminals (5) on leads (2) of passenger’s side siren switch (1).

2. Tape and secure two unused leads (6) of passenger’s siren switch (1).

NOTE

Passenger’s side and driver’s side siren switch are the same.

Repeat steps 1 and 2 for driver’s side switch.

3. Locate, mark, and drill two 0.187-in. (4.8-mm) diameter holes (8) and 0.750-in.

hole (7) on “A” beam (9).

4. Install passenger’s side siren switch (1) on “A” beam (9) with two lockwashers

(19-mm) diameter

10) and screws (11).

12-288