TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 933 of 1168

TM 9-2320-280-20-3

13-3/(13-4 blank)

a.

All equipment deficiencies noted during inspections should be repaired in accordance with vehicle

TM's.

b.

All unpainted metal surfaces must be protected during storage or shipment. Inspect, clean, and spot

paint metal surfaces as required in TM 9-2320-280-10. Unpainted exposed machined surfaces must be

prepared with corrosion-preventive compounds or oil and grease as referenced in TM 9-2320-280-10. Be

sure to select preservatives that will not harm vehicle interior components.

c.

Sunlight, heat, moisture, and dirt accelerate deterioration. Install all covers authorized for the

equipment. Close and secure all openings except those required for venting and drainage. Seal all openings

to prevent the entry of rain, snow, or dust.

d.

Inflate tires to a maximum of 30 psi (207 kPa).

13-9. LUBRICATION

Lubricate vehicles in accordance with TM 9-2320-280-10 and TM 9-2320-280-20-1 before shipment or

storage.

13-10. RECORDS AND REPORTS

Maintenance records required by AR 750-1 will be maintained and reports submitted in accordance with

DA PAM 738-750 and AR 220-1.

13-8. REPAIR, PAINTING, AND PRESERVATION