TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 1081 of 1258

2 2 - 9 . 3 .

LEFT REAR FLOOR PANEL REPAIR (Co n

t ’ d)

TM 9-2320-280-34

2 2 -1 6 . 2 8

Change 1

1.

Cut two metal strips (2) from sheet metal, and mark two reference lines (1), centerline (3), and

directional arrow (4). Identify two metal strips (2) as C and D.

2.

Place metal strips C and D (2) on a suitable work surface with arrow (4) facing up and left.

3.

Locate, mark, and drill twenty-four 0.187-in. diameter holes through metal strips C and D

(2).

4.

Bend metal strips C and D (2) 1.50 in.

c

. Metal Strips Fabrication