TM-9-2320-280-34
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
JANUARY 1996
TM-9-2320-280-34 - Page 1117 of 1258
2 2 - 9 . 4 . RIGHT FRONT FLOOR PANEL REPAIR (Co n
t ’ d)
TM 9-2320-280-34
2 2 -1 6 . 6 4
Change 1
1.
Position battery tray panel (6) on underside of right front floor panel (1), right front seat support (2),
and tunnel (4).
2.
Using right front seat support (2) as a template, mark twenty-two hole locations (5) on battery tray
panel (6).
3.
Using right tunnel (4) as a template, mark fifteen hole locations (3) on battery tray panel (6).
4.
Drill thirty-seven 0.187-in. diameter holes, marked in steps 2 and 3, through battery tray panel (6).
5.
Locate, mark, and drill two 0.187-in. diameter holes through holddown bracket (7).
6.
Locate, mark, and drill two 0.187-in. diameter holes through holddown bracket (8).
7.
Mark reference lines (10) and (11) on battery tray panel (6).
8.
Position holddown bracket (8) to reference line (11) on battery tray panel (6).
9.
Using holddown bracket (8) as a template, locate, mark, and drill two 0.187-in. diameter holes
through battery tray panel (6).
10.
Install holddown bracket (8) on battery tray panel (6) with two rivets (9).
11.
Using battery tray panel (6) as a template, locate, mark, and drill two 0.187-in. diameter holes
through holddown bracket (8).
12.
Position holddown bracket (7) to reference line (10) on battery tray panel (6).
13.
Using holddown bracket (7) as a template, locate, mark, and drill two 0.187-in. diameter holes
through battery tray panel (6).
14.
Install holddown bracket (7) on battery tray panel (6) with two rivets (9).
15.
Using battery tray panel (6) as a template, locate, mark, and drill two 0.187-in. diameter holes
through holddown bracket (7).
g
. Right Front FloorPanel and Battery Tray Drilling
Back to Top
