TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 1191 of 1258

TM 9-2320-280-34

Section II.

ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)

Figure C-17.

Front Bumper Low Pintle Plate Assembly (Back), 5992406

INSTRUCTIONS:

NOTE

•

All dimensions are in inches.

•

Remove all burrs and sharp edges after each fabrication.

1. Using NSN 9510-01-043-3616 metal bar, fabricate plate as shown in “D ”.

2.

Using NSN 9510-01-813-5343 metal bar, fabricate spacer tube as shown in "E ”.

3.

To fabricate back plate, position spacer tube (3) on plate (4) and weld into place as shown in “F ”

C-11