TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 201 of 1258

TM 9-2320-280-34

3-24.

ENGINE REMOVAL (6.5 L) (Cont ’d)

WARNING

Do not touch hot exhaust system components with bare hands.

Severe injury will result.

NOTE

It will be necessary to use additional .5 in.

(13 mm ) drive extension

12 in.

(30 cm) to remove exhaust system mounting hardware.

122.

Remove two clamps (28) and heat shield (29) from crossover pipe (27).

123.

Remove three locknuts (26), washers (12), capscrews (13), and washers (12) from crossover pipe (27)

and right exhaust manifold (14).

Discard locknuts (26)

124.

Remove three locknuts (23), washers (22), capscrews (25), and washers (22) from crossover pipe (27)

and muffler (21).

Discard locknuts (23).

125.

Remove three locknuts (19), washers (17), capscrews (16), washers (17) and crossover pipe (27) from

left exhaust manifold (18).

Discard locknuts (19).

126.

Remove and discard gaskets (15), (20), and (24).

3-139