TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 209 of 1258

TM 9-2320-280-34

3 25.

ENGINE REMOVAL (6.5 L) (Cont ’d)

WARNING

Transmission must be supported during engine installation.

Failure to

do this may cause injury to personnel or damage to equipment.

2.

Raise and support transmission (3).

3.

Install transmission (3) on engine (1) with four capscrews (4) and two studs (2).

Using torque

sequence tighten capscrews (4) and studs (2) to 35 lb-ft (48 N.m)

4.

Align right engine mount insulator (5) on engine mount bracket (6) and install two washers (8)

and locknuts (7).

Repeat for left engine mount.

Using torque adapter, tighten locknuts (7) to

90 lb-ft (122 N.m).

3-147