TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 211 of 1258

TM 9-2320-280-34

3-25

.

ENGINE INSTALLATION (6.5 L) (Cont ’d)

NOTE

•

It will be necessary to rotate flywheel clockwise from capscrew in

front of crankshaft to gain access to install capscrews to torque

converter.

•

Have assistant hold crankshaft pulley in place when installing

flywheel to torque converter.

14.

Align torque converter (17) to flywheel (15) with six capscrews (16).

15.

Tighten capscrews (16) to 32 lb-ft (43 Nm).

NOTE

Gaskets may require bending over edge of converter housings

cover to make gaskets seal properly.

16.

Apply adhesive to upper converter housing cover gasket (21).

Install gasket (21) and upper converter

housing (20) on transmission (18) with four capscrews (19).

17.

Apply adhesive to lower converter housing cover gasket (24).

Install gasket (24) and lower converter

housing (23) on transmission (18) with two capscrews (22).

3-149