TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 427 of 1258

TM 9-2320-280-34

6-8. ENGINE WIRING HARNESS REPLACEMENT (Cont ’d)

NOTE

Perform steps 27 through 29 for 200 amp regulator only.

27.

Install washer (9), lead (6), and nut (8) on terminal (10). Tighten nut (8) to 1822 lb-in. (2.0-2.5 N

•

m).

Slide rubber boot (7) over terminal (10).

28.

Install washer (12), lead 5A (13), and nut (14) on red (energize) terminal (11). Tighten nut (14)

to 23-27 lb-in. (2.6-3.0 N.m). Slide rubber boot (15) over terminal (11).

29.

Install washer (4), lead 2A (3), and nut (2) on yellow (AC) terminal (5). Tighten nut (2) to 18-22 lb-in.

(2.0-2.5 N.m). Slide rubber boot (1) over terminal (5).

6-80