TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 744 of 1258

1 5 - 3 . 6,000 LB. WINCH REPAIR (Cont’d)

NOT E

In order to perform steps 3 through 11, it may be necessary to

remove plastic coating from winch.

TM 9-2320-280-34

Change 1

1 5 -3

3.

Remove nut (11) and lead 6C (2) from control (6).

4.

Remove capscrew (10), lockwasher (9), lead 7C (3), and ground wire (4.1) from motor (14). Discard

lockwasher (9).

5.

Disconnect motor connector (13) from control connector (12).

6.

Remove three nuts (15) and control leads (16), (17), and (18) from motor (14).

7.

Remove vent tube fitting (19) from motor (14).